Petroleum engineer with a Bachelor's Degree and over 30 years of experience with a major oil company and independents. Experienced in operations, workovers, recompletions, and production facilities. Skilled with reserve and economic evaluation under different deal structures for acquisition and divestiture. Experienced in reporting reserves with complex ownership structures and differing interests. Practiced working with multidisciplinary teams on reservoir studies with experience in material balance, nodal analysis, and pressure transient analyses. Geographic areas include Texas, Appalachia, Michigan, New Mexico, south Louisiana, and Oklahoma. Proficient at Excel, OGRE, OFM, GeoGraphix, and others.

Reservoir Engineer with a master's degree in petroleum engineering and ten years of experience working for large exploration and production companies and service companies. Experienced in field development and management of mature fields, reservoir simulation, petroleum economics, uncertainty management, portfolio optimization, and reservoir surveillance. Geographic areas worked include west Texas, south Texas, the U.S. Gulf coast, and California. Software proficiency in ARIES, DSS, VIP, NEXUS, DMS, Petrel, Eclipse, Topaz, Emeraude, Spotfire, ArcGIS, MATLAB, Peep, CMG, Crystal Ball, @Risk, MBAL, GAP, PROSPER, and Desktop PVT.

Production and reservoir engineer with Bachelor's and Mater's degrees and 14 years of experience in the oil and gas industry. Expert in reservoir, exploitation, production, and operations engineering. Heavily experienced in reserves evaluation, reservoir and field studies, field development, reserve reporting, and reservoir management. Skilled in well completion, workovers, pressure transient design and analysis, wellbore problems, and trouble shooting. Geographic areas worked include Pakistan and Texas. Computer skills include MS Office, Lotus 1-2-3, Freelance Graphics, OGRE, SAM, and WEM. Fluent in Urdu and Punjabi.

Reservoir engineer with a Doctorate's degree and 17 years of domestic and international experience with major oil companies and independents, including 11 years of academic experience. Highly experienced in paraffin and asphaltene disposition prevention and/or control. Specialist in oil and gas reservoir and production engineering studies and environmental engineering applied to wastewater treatment and oil-contaminated soil. Experienced in reserve evaluation, reservoir studies, enhanced oil recovery studies, simulation, property evaluation, acquisition, and economic evaluation. Geographic areas worked include the Gulf coast, Venezuela, Mexico, and onshore Texas. Computer skills include reservoir simulation software, production optimization software, statistical software, analysis software, VAX/VMS System, Fortran and Basic, WINDOWS NT, and OFFICE 97.

Production and Reservoir Engineer with a bachelor's degree in chemical engineering and 37 years of experience working for small to mid-sized independents and a banking institution. Experienced in A&D analysis, field studies, classical reservoir engineering, reserve forecasting, reserve reporting, economic forecasting, risk analysis, nodal analysis, AFE preparation, and well and facilities cost estimation. Geographic areas worked include south Texas, west Texas, south Louisiana, the GOM shelf, and Colorado. Software proficiency in ARIES, Spotfire, PHDWin, RSA, and PERFORM.

Senior production engineer and asset manager with a doctorate in petroleum engineering and over 25 years of experience with a major oil company. Experienced leading production and reservoir engineers to optimize operated production as well as to provide oversight for OBO interests. Also provided functional and strategic oversight for the recruitment, deployment and development of the global population of petroleum engineers, reservoir engineers, and petrophysicists including recruiting and onboarding personnel from a major acquisition. Earlier experience includes maintaining functional excellence in production optimization (well reviews, technical limit reviews, flow assurance best practices), and reservoir surveillance, delivering annual total production targets, including experience in waterfloods as well as future field developments. Expert in field and reservoir management, especially production optimization. Geographic areas worked include the US Lower 48 including coalbed methane, the deepwater Gulf of Mexico, Indonesia, and Australia.

Production Engineer with a bachelor's degree in petroleum and natural gas engineering and eight years of experience working for service companies. Experienced in production allocation, well surveillance, production operations, workover and stimulation identification, production optimization, and workflow design. Geographic areas worked include the United States, Angola, and Latin America. Software proficiency in DSS, TOW, and DrillNET. Language proficiency in English, Spanish, and Portuguese. Certifications include HUET.

Production and Reservoir Engineer with a bachelor's degree in chemical engineering and 30 years of experience working for large independents. Experienced in management, prospect evaluations, engineering field studies, acquisition analysis, and reserves system management. Geographic areas worked include Egypt, the offshore Texas coast, and Michigan. Software proficiency in ARIES and PanSystem.

Registered professional engineer with a Bachelor's Degree and 21 years of experience working for a major oil company and as a consultant. Expert in applying production, reservoir, and drilling experience to project evaluations, well designs, and field operations. Proven ability to work independently or in a team environment, in the office, or at the well site. Geographic areas worked include the Gulf coast, Gulf of Mexico, and international locations. Proficient in OGRE and ARIES. Excellent computer skills.

Production and Reservoir Engineer with a bachelor's degree in petroleum engineering and 16 years of oil and gas industry experience working for majors,m nid-sized independents, and as a consultant. Experienced in completions, reservoir surveillance, decline curve analysis, production forecasting, implementing recompletions and workovers, production optimization, reserve estimation, and past, present, and future reservoir analysis performance. Geographic areas worked include the Barnett, Bakken, Austin Chalk, Monterey, Niobrara, Marcellus, Haynesville, Cotton Valley, Bossier, and Eagle Ford formations; the Gulf of Mexico, the Permian Basin, East Texas, California, Argentina, Brazil, and Mexico. Software profieciency in DSS, Oil Field Mananger, Power Tools, PHDWIN, WEM, Wellflo, Marlim II, Prospec, Drillinginfo, PipeSim, Quicklook, Eclipse100, MBAL, Saphir, PanSystem, FracproPT, GOHFER, MAEP, ARIES, DMS, Spotfire, Kristalball, GeoGrafic Discovery, Zmap, Microsoft Office, Adobe, Oracle, UNIX, Compass, and NETool. Language fluency in English, Spanish, and Portuguese.

Reservoir engineer with a Ph.D. in mechanical engineering and 30 years of experience working for a major operator, a small operator, and as a consultant. Expert in analytical and full field well modeling. Additionally experienced in conventional and unconventional reservoir stimulation, log analysis, reservoir estimation, reserve reporting, production forecasting, property valuation, A&D process, production optimization, and mentoring. Geographic areas worked include the United States, Australia, and South Africa. Software proficiency in PHDWin, ARIES, Peep, PETRA, PMTx, Fekete Harmony, and Spotfire.

Production and engineering manager with a Bachelor's Degree and over 20 years of diversified domestic and international experience. Highly skilled in corporate production and reserve management, engineering evaluations, acquisitions, dispositions, merger evaluations, new ventures, project evaluations, risk analysis, strategic planning, management of operations, and operating budgets. Experienced in collective bargaining and labor, contracts, and international state oil company negotiations. Knowledgeable in international fiscal terms and production sharing contracts. Proficient in Microsoft Office, OGRE, ARIES, and PEEP. Geographic areas worked include the onshore and offshore Gulf of Mexico, the Ventura basin, San Joaquin Valley, west and east Texas, southeast New Mexico, north Louisiana, South America, southeast Asia, and the west coast of Africa.

Reservoir and production engineer with a Bachelor's Degree and 20 years of diversified experience with a major oil company and a large service company. Experienced in completion design and offshore operations. Strong in acquisitions, field studies, and design and evaluation of frac pack systems for low resistivity formations. Excellent analytical skills and administrative abilities. Areas worked include the Gulf of Mexico and offshore California. Proficient in Production Analyst, OGRE, PEEP, and WEM.

Reservoir and Production Engineer with a master's degree in petroleum engineering and 14 years of experience working for major operators. Experienced in reserves evaluation, prospect evaluation, field studies, nodal analysis, production optimization, workovers, well interventions, and economic analysis. Geographic areas worked include the Gulf of Mexico, Wyoming, Oklahoma, New Mexico, Louisiana, and the Niger Delta. Software proficiency in Peep, F.A.S.T. RTA, PETRA, PROSPER, GAP, MBAL, PERFORM, and WEM.

Production and reservoir engineer with a Master's degree and 28 years of experience with a major oil company. Expert in CO2 flooding projects. Highly experienced in secondary recovery projects, workovers, artificial lift optimization, coiled tubing operations, sand control, compression studies, log analysis, equipment selection, and field operations. Highly skilled in development of horizontal drilling prospects, property evaluation, production forecasting, field studies, enhanced recovery, and capital budgeting. Experienced in management of joint venture operations and contract negotiations. Geographic areas worked include onshore Louisiana and Texas. Computer skills include MS Office, Lotus 1-2-3, Workbench, Production Analyst, Dwight's/P.I., and Merlin/SSI.

Petroleum engineer with a bachelors degree and over 30 years of domestic and international experience in the petroleum industry. Highly skilled in reservoir surveillance, production, and exploration. Experienced in 3-D seismic, petrophysics, pressure transient solutions, subsurface pressure data, core analysis, P.V.T. analysis, and production. Geographic areas worked include Iran, the Netherlands, and Canada. Computer skills include a working knowledge of MS Office, Workbench, and Production Analyst.

Production Manager and engineer with 30 years of diversified industry experience in operations and production engineering with large and small independents. Experienced in managing office engineering and field operations staff to establish priorities and goals to maximize profitability including recommending and executing workovers and stimulations in many wells. Also experienced in engineering including CO2 recovery and waterfloods and in ensuring the safety of personnel. Have managed more than 2000 producing wells and 50,000 BOEPD with staff up to 190 employees. Geographic experience includes ArkLaTex, Oklahoma, the Permian Basin, New Mexico, Alberta, and Saskatchewan, and the San Juan Basin.

Production and reservoir engineer with a Bachelor's degree and 21 years of experience working for a major oil and gas company. Experienced in economic evaluations, acquisitions and divestments, workovers, completions, field studies, and project management. Excellent in analysis, interpretation, and problem solving. Experienced in field and office environments. Geographic expertise is the entire Gulf of Mexico. Computer skills include MS Office, PEEP, SAM, Production Analyst, Dwight's/P.I., OilWat, and GASWAT.

Executive-level Engineer with master's degrees in finance and operations research, a bachelor's degree in petroleum engineering, and 28 years of experience working for mid-sized to large operators, an energy company, and financial institutions. Has worked in several key executive level roles including Director, Senior Vice President, and Executive Director. As an executive, managed and led the petroleum engineering function for a reserve based lending business, evaluated technical and economic parameters of oil and gas assets to determine the risk-adjusted loan value, and led the business development, operational planning, and reserve management functions of a multi-billion dollar company. As an engineer, managed the corporate reserves reporting function, performed acquisition due diligence and economic analysis, and prepared detailed presentations to executives. Software proficiency in ARIES and PHDWin.

Production Engineer with a bachelor's degree in petroleum engineering and six years of experience working for operators and service companies. Experienced in preparing procedures and schematics for P&A, reviewing work proposals against BSEE regulations, analyzing past project data for post-project review, conducting cost and utilization analysis of personnel and assets, reviewing weekly drilling and completion reports for safety and procedure compliance, and preparing cost estimates and well intervention procedures. Geographic areas worked include the Gulf of Mexico. Software proficiency in Microsoft Office. Certifications include TWIC, Well Control, and HUET.

Petroleum engineer with a Master's Degree and 21 years of experience, both domestic and international. Experienced in reservoir, production, and drilling projects including reservoir simulation, reserve estimation, field studies, portfolio and project economics, field development, gas-lift design and operations, and production log analysis. Geographic areas worked include south Louisiana, Gulf of Mexico, and the North Sea. Software proficiency in Prophet, VIP, Eclipse, Exodus, FRACPRO, WEM, GASWAT, and OilWat. Familiar with ARIES, OGRE, and PEEP.

Production and Reservoir Engineer with a bachelor's degree in petroleum engineering and 11 years of experience working for a small operator. Experienced in artificial lift, property and lease evaluation, property acquisition, contract negotiation, well and field design, wellsite supervision, and environmental compliance. Additionally experienced in acquisition, evaluation, and divestiture of oil and gas properties; and selection of new drill well locations. Geographic areas worked include Texas. Software proficiency in Petra, Drillinginfo, and Lasser. Language proficiency in English and Spanish.

Registered professional engineer with a Master's Degree and 22 years of experience working for a major oil company and several independent oil companies. Highly experienced in completion and workover design, stimulation, and artificial lift. Highly experienced in performing formation evaluations including open-hole and cased-hole logs. Experienced in roles within an office environment as well as in field operations. Geographic experience includes the mid-continent, Rocky Mountain, California, Texas, and Gulf Coast basins. Computer proficient in Excel, Word, ARIES, PowerTools, Perform, Eclipse, and Fracade.

Production and Reservoir Engineer with a master's degree in petroleum engineering and more than 20 years of oil and gas industry experience working for majors and large independents. Experienced in probabilistic modeling, mass and heat balancing, well interference studies, field evaluation, reserve prediction, development planning, and material balance determination. Geographic areas worked include the United States, Canada, Mexico, Brazil, Venezuela, and Trinidad and Tobago. Software proficiency in Prosper, MBAL, and GAP. Language proficiency in Spanish and English with a limited proficiency in Portuguese.

Reservoir Engineer with a master's degree in environmental engineering, a bachelor's degree in petroleum engineering, and 36 years of experience working for small to mid-size independents. Experienced in reservoir and production engineering with technical and economic evaluation of business development offers, new ventures, and unconventional resource projects. Additionally experienced in the design of well completions, hydraulic stimulations, workovers, and recompletions to enhance production. Software proficiency in ARIES. Geographic areas worked include south Texas, the Williston basin, the Powder River basin, the Green River basin, and other locations in the Rocky Mountain region.

Reservoir Engineer with a master's degree in petroleum engineering and three years of experience in monitoring daily production rates, developing production decline curves and material balance to be utilized in economic evaluation, and analyzing log and core data. Additionally experienced in work over procedures, casing and cement design, and artificial lift. Geographic area worked includes Louisiana. Software proficiency in PETRA and Neuralog.

Reservoir Engineer with a bachelor's degree in petroleum engineering and 16 years of experience working for independent operators, major oil and gas companies, and as a consultant. Experienced in reserves reporting, acquisitions and divestitures, enhanced oil recovery design and implementation, and economic evaluations of workovers, development, and exploration projects. Geographic areas worked include east and south Texas, the Gulf coast, Louisiana, and Trinidad. Software proficiency in PHDWin. Language proficiency in English.

Production and reservoir engineer with a Bachelor's and Master's degree and 20 years of experience with major oil companies and the government. Proficient at production optimization and waterflood and miscible injection projects. Skilled at nodal analysis and workover and recompletion design and procedures. Experienced in logging operations, perforating, and coiled tubing. Skilled at reservoir management. Experienced in project economic evaluation and establishing property value. Geographic areas worked include the Permian Basin, Texas, Louisiana, and Alaska. Computer skills include MS Office, Dwight's, Nolte-Smith FRAC Design, MacEcon, Econ, and Alaska Group Economic Model (AGEM).

Reservoir and Production Engineer with a bachelor's degree and two years of oil and gas experience working for an operator. Experienced in acquisition evaluation, capital budgeting, reserve reporting, hydraulic fracturing, and oversight of production and workover operations. Geographic areas worked include the Permian Basin and south Texas. Software proficiency in ARIES, WellEZ, PI Dwights, and Drillinginfo.

Petroleum Engineer with a bachelor's degree in Chemical Engineering and more than 30 years of experience working for major companies in the oil and gas industry. Technical competencies in completions, interventions, stimulations, production, reservoir and optimization. Expertise includes HPHT stimulations, sand control, design of fracture and matrix treatments, water flooding, artificial lift, scale inhibition, DST's, well testing, water flooding, as well as well rate enhancement, problem well analysis, de-bottlenecking, and conformance. Geographic work experience includes the United States, Canada and England along with numerous locations in the Middle East and Far East. Registered professional engineer.

Petroleum engineer with 23 years of experience in the oil and gas industry for both a major and independents as both an employee and consultant. Strong reservoir and production skills with significant acquisition and divestment experience. Production experience includes difficult environments, both surface and downhole. Experienced in high pressure and waterflood properties. Geographic experience includes the Gulf of Mexico, the Louisiana gulf coast, and Colorado.

Registered professional petroleum engineer and economic evaluations consultant with an MBA and over 26 years of experience in the oil and gas industry. Highly experienced in economic evaluations and risk analysis of worldwide asset acquisitions, divestitures, and investment option decision analysis, leading to investments of up to $500 million. Able to integrate technical, commercial, and economic information to assess the value, risks, and uncertainties of exploration and production assets. Motivated, energetic, and a results-oriented team player. Extensively experienced in reservoir engineering, tactical and strategic planning, drilling and production engineering and operations, and project management. Geographic areas worked include Texas, southeast Asia, the Middle East, Latin America, west Africa, and the North Sea. Computer skills include MS Office, standard economic evaluation programs, Monte-Carlo simulation, creating custom economic evaluation models, and decision-tree analysis programs. Fluent in German with working knowledge of Spanish and Portuguese.

Production engineer with over 30 years of experience in production, reservoir, and drilling projects with both large and small independents. Expert at troubleshooting downhole and reservoir problems unlocking the potential of gas reservoirs. Supervisor of all stages of drilling and completion operations, both on-site and by phone. Experienced in workover justification, field studies, production optimization, fracture stimulation, pipe setting decisions, facilities, well planning, artificial lift, reserve determination, economic evaluations for acquisition and divestiture, and a working knowledge of oil field accounting practices.

Reservoir and production engineer with a doctorate in petroleum engineering and 35 years in academia and the oil and gas industry. Skilled in reservoir planning and development, production geology, reservoir modeling, economic modeling, budgeting, waterflood design, and teaching. Geographic areas worked include Alabama, Michigan, California, Louisiana, Mexico, Oklahoma, Texas, west Africa, and the Middle East. Computer skills include MS Excel, DSS, and Dwight's.

Reservoir Engineer with a master's degree in petroleum engineering and 18 years of experience working for an engineering consulting firm, a royalty acquisition company, and a state oil company. Experienced in material balance, volumetric analysis, production forecasting, infill strategy, decline curve analysis, economic analysis, well test analysis, and simulation. Geographic areas worked include Texas, Mexico, and Venezuela. Software proficiency in ARIES, ECLIPSE, and OFM.

Production and Reservoir Engineer with a master's degree in petroleum engineering and six years of experience working for service companies. Experienced in enhanced oil recovery, depletion planning, reservoir studies, reservoir simulation, reserve estimation, nodal analysis, and field development planning. Geographic areas worked include Texas, Oklahoma, Louisiana, the Gulf of Mexico, and Kazakhstan. Software proficiency in PROSPER, OFM, MBAL, Eclipse, and PVTSim.

Reservoir and Production Engineer with a master's degree and two years of experience working for an independent exploration and production company. Experienced in reserves updating; review and presentation of all company assets including volumetric analysis, drilling performance, and decline curve analysis; log analysis of well performance and completions design to improve reservoir evaluations and optimize future well completions; facility installation and upgrades; and implementation of completions, well logging, fishing jobs, and artificial lift installation. Geographic areas worked include west and south Texas, Oklahoma, and Alaska. Software proficiency in ARIES, PHDWin, Eclipse, and GAP.

Reservoir and Production Engineer with a bachelor's degree in petroleum engineering and 39 years of experience working for small to large operators and consulting firms. Experienced in identifying recompletion candidates, production optimization opportunities (infill drilling and re-fracturing), and well operations improvements (downhole co-mingling and lift mode modifications). Geographic areas worked include Texas, Oklahoma, New Mexico, Wyoming, West Virginia, Pennsylvania as well as offshore Louisiana. Language fluency in English. Licensed Professional Engineer in Texas and West Virginia.

Production and reservoir engineer with a Bachelor's degree and 21 years of experience with a major oil company independent and consultants. Adept at producing well evaluation for productivity optimization. Skilled at nodal analysis, pressure transient buildup, onshore and offshore workover and recompletion design, and writing of procedures including stipulations. Expert in perforating and coil tubing operations in hostile environments. Highly experienced in reservoir field studies, decline curve analysis, and economics for drilling and remedial prospects. Geographic areas worked include the Gulf of Thailand, east Texas, north and south Louisiana, Arkansas, and Mississippi. Computer skills include MS Word, Lotus 1-2-3, Freelance Graphics, ARIES, SAM, Dwight's, Welltest, Toolkit, Frac Job 2, Energy Industries, and RP II Pumping Unit Design.

Petroleum Engineer with a bachelor's degree in mechanical engineering and 35 years of oil and gas experience working for major and mid-sized oil companies, service companies, and financial institutions. Experienced in reservoir evaluations, reserves valuations, acquisitions, divestitures, and economics. Also experienced in production operations, artificial lift, workovers, personnel management, and client and vendor negotiations. Geographic areas worked include the Texas Gulf coast, west Texas, the mid-continent, the Rocky Mountains, and the Gulf of Mexico.

Reservoir and Production Engineer with a bachelor's degree in petroleum engineering and more than 30 years of experience working for a major international oil company and as a consultant. Experienced in engineering management, economic evaluation, acquisition evaluation, reservoir engineering, production, and drilling operations. Geographic areas worked include the mid-continent, the offshore Gulf of Mexico, the North Sea, offshore northwest Australia, offshore China Sea, onshore Pakistan, Indonesia, Yemen, Egypt, Tunisia, Kuwait, Abu Dhabi, and Congo. Software proficiency in Freelance Graphics and Microsoft Office.

Registered petroleum engineer with a Master's Degree and over 12 years of experience in reservoir, production, and drilling projects. Experienced in field and office supervision of drilling, completion, and production operations. Highly skilled in oil and gas property evaluation and economics, drilling, completion, workover design, tight gas sand completion and stimulation, and producing field evaluation and optimization. Familiar with coalbed methane, enhanced oil recovery, and waterflooding. Geographic areas worked include Colorado, New Mexico, Utah, Wyoming, Kansas, Oklahoma, Arkansas, Louisiana, and Texas. Familiar with various computer programs including Microsoft Office, PowerTools, SROD, ARIES, OFM, and PI/Dwights.

Petroleum engineer and business analyst with 12 years of direct experience in the energy industry. Strong analytical, relational, and technical expertise, including strong IT skills. Skilled at reporting information to all parties from both complex and simple systems. Excellent communication and project management skills. Fluent in Italian and conversant in French and Spanish.

Reservoir engineer with a Bachelor's degree and over 30 years of experience with a major oil company. Skilled at evaluating reservoir performance, identifying opportunities to improve profitability, managing complex projects, and communicating results. Experienced in managing secondary and primary recovery operations, and in supervising reservoir studies including infill drilling, deepenings, recompletions, waterfloods, CO2 floods, and horizontal drilling. Also experienced in reserve estimating and evaluating properties for acquisition, trade, and sale. Geographic areas worked include Michigan, the Gulf coast, the Permian Basin, east Texas, and Alabama. Computer skills include PEEP, Production Analyst, Oil Field Manager, Dwight's, Perform, and MS Office.

Petroleum Engineer and Project Manager with 21 years of worldwide oil and gas industry experience in production and reservoir engineering. Strong project planning and management skills combined with excellent analytical and technical skills. Proficient in MS Office and Project. Knowledgeable of most petroleum engineering softwares such as WelFlo (for Oil well Nodal Analysis), GasFlo(for gas well Nodal Analysis), WEM, Win DSS (for Decline curves analysis) and many others. Fluency in written and spoken English, French and Portuguese.

Reservoir and production engineer with a Master's Degree and 13 years of experience with major oil companies and as a consultant. Experience includes well completions, workovers, stimulation design and supervision, property evaluation, log and pressure analysis, acquisitions evaluations, and economic evaluations. Geographic areas worked include Oklahoma, north Texas, Texas Panhandle, Williston basin, Nebraska, New York, Ohio, West Virginia, and Bay of Campeche in Mexico.

Production Engineer with a bachelor's degree in natural gas engineering and 17 years of experience working for major and independent oil and gas companies and service companies. Experienced in completions, workovers, production optimization, field development, and reservoir management. Geographic areas worked include the Gulf of Mexico, Louisiana, and Texas. Software proficiency in MBAL, PROSPER, OFM, and PERFORM.

Reservoir Engineer with a masters degree in natural gas engineering and 10 years of experience in the upstream oil and gas industry. Skilled at early field development; field architecture, pre-FEED and cost estimation; international prospect evaluation; hydrocarbon asset economic and uncertainty analysis; reservoir simulation and estimation; production forecast and decline curve analysis; discovery and commercialization projects; and investment banking. Computer skills include QUESTOR, ASSET (similar to Aries and PEEP), PERFORM, HYSYS, OILWAT/GASWAT, POWERTOOLS, PIDWIGHT, EDINGIS, PROBE, ASSETBANK, IHS Database Tools, ArcGIS, and MS Office.

Accomplished petroleum engineer with 25 years of experience and a proven track record of increasing production and reducing project cycle time. Highly experienced in handling multiple complex projects. Extensively experienced in reservoir management, production engineering, secondary and tertiary recovery, project management, cost reduction, and property evaluation. Geographic experience includes California, west Africa, and the Middle East.

Production and Reservoir Engineer with a master's degree and nine years of experience with major oil companies. Experienced in production operations, operational reservoir engineering, HSE, and geoscience. Skilled in optimization of well production and field management, including implementation of workover programs and selection of workover candidates. Computer skills include PI Data System, CAO tool, Prosper Nodal Analysis, Spider/MultiSim, Eclipse, material balance software, MS Office, and Visio Technical. Ask for PR411.

Registered professional engineer with a Bachelor's Degree and 28 years of experience working with majors and independents. Experienced in preparing capital and operating budgets, exploitation, production workover, drilling, acquisitions and divestitures, reserve estimation, and economic evaluations. Geographic areas worked include onshore Louisiana, Texas, the Rocky Mountains, the Gulf of Mexico, Canada, Algeria, Argentina, Columbia, the North Sea, and Indonesia.

Reservoir Engineer with a bachelor's degree and over 20 years of experience. Strong track record with integrated project teams and reservoir development. Closely involved with a number of key initiatives in Operated Development Projects internationally, including progressed Enterprise Oils first GOM Deepwater Operatorship to agreed concept selection. Played key role in first EO FPSO development, drilled 6 complex ”designer” wells. Delivered first operated HPHT, pipe in pipe subsea development. Successfully completed first operated horizontal and extended reach wells, 4-D seismic survey. Introduced 3-D geo-cellular modeling and geostatistics for reservoir description within EO. Geographic areas worked include the North Sea.

A versatile production engineer with a Master's Degree and over 30 years of experience with a major international oil company. Experience covers reservoir engineering, production engineering, enhanced oil recovery, open and cased hole log evaluation, property divestment, and data administration. Geographic areas worked include Mexico, Texas, and California. Computer skills include OFM, DSS, Welflo, Fieldflo, Pansytem, Pipesim, Merak, OGRE, and Microsoft Office Professional.

Production and reservoir engineer with a Master's Degree and 12 years of experience, 11 of which were with a major oil company working offshore Gulf of Mexico fields. Excellent reservoir management skills, with experience leading multi-disciplinary teams to optimize field contribution. Extensive technical expertise in reservoir engineering analysis to formulate depletion plans in old fields. Production engineering experience includes log analysis, workover design and supervision, and facility de-bottlenecking using nodal analysis. Computer skills include high degree of proficiency in Microsoft Word, Lotus 1-2-3, OGRE, WEM, and MATBAL.

Petroleum engineer with two years of experience in Columbia, South America. Skilled at preparing wire line and tools to optimal conditions prior to downhole projects. Experienced at monitoring tool operations for the removal of formation damage. Computer skills include MS Office, Matlab 6.0, Linear Programming, Fekete F.A.S.T. Well Test, Surfer 8.0, Workover Office 3.0, Well PERFORMance Analysis, Hysys 2.4, CMG Simulator STARS, IMEX, and GEM.

Reservoir engineer skilled in reserves determination and economic analysis of oil and gas properties with an operational background in the design, installation, and cost management of various surface and downhole production operations.

Petroleum engineer with Bachelors Degree and 7 years of experience in reservoir, production, and exploitation projects. Experienced in reservoir monitoring, reserve estimation, field studies, portfolio and project economics, field development, gas-lift design and operations, ESP design and operations, cyclic steam injection, and horizontal and inclined well design and monitoring. Geographic areas worked include the western part of Venezuela, specifically in Maracaibo Lake. Proficient in various computer programs including Microsoft Windows, Microsoft Office, Sub-pump, Perform, Well-flow, PIPESIM, OFM, Sapphire, and Crystal Ball.

Petroleum engineer and property acquisitions manager with a Bachelor's Degree and 25 years of experience with a major oil company, two independents, and as a consultant. Experienced in all aspects of production and reservoir engineering, with special skills in field operations, stimulations, and other remedial work. Geographic areas worked include Louisiana, Mississippi, Alabama, and Trinidad. Proficient in Lotus 1-2-3, Microsoft Word, Excel, Dwight's, and P.I.