Expert Club
Disciplines
Recruiting
Open Positions
Resumes
Featured Candidates
People
Tools
About Collarini                                                 
Collarini Associates                                                      
Collarini Career Management                                                           
Collarini Energy Staffing                                                               
Home                                                                  
        Collarini Energy Staffing
Resumes

Only those of our candidates who choose to be displayed on our web site are shown here. We are in contact with many more candidates in each discipline. A complimentary customized search will be conducted to your specifications by one of our expert placement managers.

Drilling Engineers Comments Home Base
 
Drilling Engineer - D555 Drilling Engineer with a bachelor’s degree in petroleum engineering and a PhD in mineral economics with four years in the military and 34 years working for major and large independent companies and as a consultant. Experienced in well design and execution including preparation of extensive cost estimates and turnkey bids with special expertise in high pressure, high temperature wells. Also experienced in deepwater and shallow offshore drilling rigs and in risk analysis and economics for exploration. Geographic areas worked include Africa, the Middle East, Russia, Venezuela, and the Gulf of Mexico. Houston
 
Drilling Engineer - D598 Drilling and Completions Manager with a master’s degree in petroleum engineering, a bachelor’s degree in physics, and 40 years of experience working for a major operator, small independents, service companies, and the federal government. Experience includes onshore and offshore well engineering (drilling, sidetracking, workovers, completions, plug and abandonment, etc.), horizontal wells, operations management, well control incidents, AFE development, onsite supervision, planning, cost estimation, contract analysis and approval, acquisition assessments, process development, technology upgrades, third-party certification (drilling plans, casing designs, abandonments, etc.), federal and state expert witness testimony, worldwide engineering training and seminars, onshore and offshore well control and blowout prevention training, recruiting, and marketing. Geographic areas worked include Angola, western Australia, Colorado, the Gulf of Mexico, Kansas, Louisiana, Mississippi, New Mexico, Nigeria, Saudi Arabia, Texas, Trinidad and Tobago, the United Kingdom, Wyoming, and Zaire. Computer skills include Prentice Casing Design and WellView. Languages include English and French. Louisiana
 
Drilling Engineer - D613 Operations Manager and Drilling Engineer with an MBA, a bachelor’s degree in petroleum engineering, and 35 years of experience working for small independent operators, service companies, and a trade organization. Managerial experience includes onshore and deepwater projects, multidisciplinary team management, FEED leadership, drilling, completions, recompletions, horizontal wells, drilling technology development and implementation, cost estimates, budgeting, ARIES evaluations, and investor presentations. Additional experience includes safety and integrity assurance, equipment safety standards, Q1 and ISO 9000 quality assurance programs, and environmental regulations (NORM, CERCLA, SARA, and Clean Air). Recognized expert on above ground storage tanks. Geographic areas worked include Arkansas, Alaska, Brazil, Canada, Chile, China, Gabon, the Gulf of Mexico, Mid-Continent, New Mexico, Oklahoma, the Rocky Mountains, Russia, Texas, and Wyoming. Holds two patents in artificial lift. Houston
 
Drilling Engineer - D662 Drilling Engineer with a bachelor’s degree in chemical engineering and 10 years of experience working for a major operator and small independents. Experience includes drilling, coil tubing, completions, well interventions, drilling team management, cementing policy standardization, hole cleaning and casing running standardization, pump system and shakers upgrades, BHA and drill pipe rental optimization, fluid program optimization, cost tracking, and after action items. Additional experience includes horizontal drilling and completions engineering support, drilling and completion programs, AFEs, APDs, rig and drilling program optimization, technology implementation, field testing, capital expenditure oversight, and procedural design. Geographic areas worked include the Eagleford Formation, the Gulf of Mexico, New Mexico, the San Juan basin, and Texas. Software proficiencies include Landmark Engineering Suite (Compass, Stress Check, WellPlan) and SAP. Houston
 
Drilling Engineer - D537 Drilling Manager with a bachelor's degree in petroleum engineering and 36 years of experience working for a major operator and as a consultant. Experienced in leading multi-disciplined teams, devising strategies, determining priorities, planning, budgeting, and cost oversight. Additionally experienced in drilling, testing, and completion of exploration wells; supervising contractors, and overseeing drilling and completion operations. Geographic areas worked include the Gulf of Mexico shelf, the onshore Gulf coast, west Texas, Colorado, New Mexico, Nebraska, Utah, Wyoming, and Kurdistan. Houston
 
Drilling Engineer - D611 Operations Manager and Drilling Engineer with a bachelor’s degree in ocean engineering and eight years of experience working for a major operator, a large independent, and a service company. Operations management experience include bids and awards, TRRC filings, pad construction, reserve pit design, water management, traffic control, remediation, and rig supervision. Additional experience includes subsea SURF, equipment design and enhancement, multidisciplinary team management, horizontal well drilling programs, WWD design standards, KPIs, drilling QA and QC, planning and optimization, drilling simulations and analysis, cost estimates and reporting, AFEs, risk analysis, permitting, peer review leadership, and technical engineering support. Geographic areas worked include the Eagleford Shale, the Glen Rose Formation, Iraq, Oklahoma, the Pearsall Shale, and south Texas. Houston
 
Drilling Engineer - D661 Drilling Engineer with a bachelor’s degrees in science and mechanical engineering and eight years of experience working for major operators and a service company. Managerial experience includes turnkey bid formation, operations surveillance, cost analysis, drilling procedures, and operations standards. Additional experience includes drilling horizontal multi-well pads, heavy crude oil wells, unconventional tight wells, vertical and directional drilling, developmental processes and standardization, rig procedures and planning, international engineering support, well surveillance, completion programs and design, analysis of drilling data, well reporting, risk assessments, root cause analyses, exploratory/appraisal cost estimates, cost reconciliations, operational performance trending, and mentorship of junior drilling engineers. Geographic areas worked include Chad, Africa, the Eagleford field, the Permian, and the Wolfcamp Formation. Software proficiencies include K&M Technology Extended Reach, Landmark, Spotfire, and WellView. Houston
 
Drilling Engineer - D522 Drilling engineer with a bachelor's degree in petroleum engineering and 32 years of experience working for major and small operators. Experienced in drilling design and execution, horizontal drilling design, field supervision operations, HSE, project management, and production engineering. Geographic areas worked include Texas, Louisiana, the Gulf of Mexico shelf, Permian Basin, Utah, and California. Registered professional engineer in the state of Texas. Houston
 
Drilling Engineer - D524 Drilling Engineering Manager with a bachelor's degree in petroleum engineering and 33 years of experience working for drilling companies and operators. Experienced in planning and executing offshore projects, leading drilling managers, engineers, and logistics and operations personnel; establishing operational bases, and overseeing and managing drilling budgets in excess of a half billion dollars. Geographic areas worked include the Gulf of Mexico deepwater, Africa, South America, the Middle East, the North Sea, Montana, California, Texas, Louisiana, and Alabama. Registered Professional Engineer in the State of Louisiana. Houston
 
Drilling Engineer - D253 Drilling and Production Engineer with a bachelor's degree in petroleum engineering and 32 years of experience working for mid-sized and major operators, a major service company, and as a consultant. Expert in the design, development, implementation, and management of new well completions, workovers, and well interventions for horizontal wells and HPHT completions and the design and testing of new drilling equipment for deepwater. Additionally experienced in regulatory filings, cost estimations, AFE preparation, and budgeting. Geographic areas worked include the Gulf of Mexico shelf and deepwater, south Texas, the mid-continent and South America. Houston
 
Drilling Engineer - D617 Drilling engineer and manager with a master’s degree in petroleum engineering and over 30 years of diverse experience with independents and as a consultant. Experienced in drilling, completions, and production operations and engineering, asset valuations, and personnel and project management. Proven track record of successful drilling, completions, and workovers in HPHT and normally-pressured environments, including conventional, horizontal, and highly deviated wells including fracturing with emphasis on integration of rock mechanics with completion methods. Knowledgeable in production and reservoir performance and economic modeling for validation of capital spending and for acquisition and divestitures. Executive skills include corporate strategy, development planning, capital and expense budgeting, business development, and people management. Geographic experience includes shales in Texas and Utah, deep conventional in Texas, Alabama, Nebraska, Montana, Louisiana, and the mid-continent. Houston
 
Drilling Engineer - D567 Drilling Engineer with a bachelor's degree in mechanical engineering and over 30 years of experience working for a large and a major operator. Experienced in normal and high pressure well design, business development planning for international E&P operations, project management, safety management, international relations, global procurement, technical and non-technical supervision, well control including HPHT development, and deepwater operations. Geographic areas worked include deepwater Gulf of Mexico, California, Wyoming, Colorado, Alaska, Canada, Nigeria, Indonesia, the Philippines, Brazil, Kazakhstan, China, Argentina, and Norway. Houston
 
Drilling Engineer - D80 Drilling Engineer with a bachelor’s degree in mechanical engineering and 37 years of oil and gas industry experience working for majors, independents, and as a consultant. Experienced in offshore platform operation, workovers, drilling, completions, workovers, and completion evaluation. Geographic areas worked include Texas, Louisiana, Kansas, the Gulf of Mexico, and offshore Ireland. Houston
 
Drilling Engineer - D55 Drilling Engineer with a bachelor’s degree in mechanical engineering and more than 30 years of oil and gas industry experience working for majors, independents, and academia. Experienced in project planning, project engineering and design, RFP and AFE package development, permit application, agency interaction, SCAQMD and CARB emissions negotiations, schedule and cost tracking, on-site project management, direct supervision and coordination of contractors, vendors, and suppliers; pipeline integrity management, power generation and energy efficiency studies, and the management of drilling programs. Geographic areas worked include the contiguous United States, Alaska, the Middle East and the Far East. Licensed General Engineering Class-A Contractor in the State of California. California
 
Drilling Engineer - D588 Deepwater Drilling Engineer with a bachelor’s degree in petroleum engineering and 35 years of oil and gas industry experience working for majors and mid-sized to large independent operating companies. Experienced in deepwater drilling, pore pressure/frac gradient estimation, casing design, well planning, and completions. Additionally experienced in regulatory compliance, HSE and SEMS compliance, and operations programs. Geographic areas worked include the Gulf of Mexico deepwater, ultra-deepwater, and shelf. Language fluency in Spanish, German, French, and Portuguese. Certifications include IADC WellCAP Well Control. Houston
 
Drilling Engineer - D591 Senior licensed drilling engineer and production manager with a bachelor’s degree in petroleum engineering and 15 years of experience with a major oil company, an independent and as the owner of a consulting company and an exploration company. Supervised all aspects of well design and operations for offshore, inland water, and land locations, including underbalanced horizontal applications and abnormally pressured wells. Planned and analyzed all critical well operations and executed the technical drilling plan. Experienced communicating with executive management, partners, technical staff, and field supervisors on current operations, and ensuring all health, safety, and regulatory measures were properly followed and reported. Geographic areas worked include the Gulf of Mexico, Alaska, and south Louisiana. Lafayette
 
Drilling Engineer - D131 Drilling engineer with a bachelor’s degree in petroleum engineering and 14 years of experience with a major oil company and as a consultant. Experienced in drilling, completions, and workovers in onshore and offshore operations including project planning, well design, permitting, cost estimating and AFE preparation, detailed drilling procedures, pore pressure design, vendor selection, and monitoring implementation. Also experienced in major deepwater developments, HPHT wells, horizontal wells, and technical studies. Geographic areas worked include the Gulf of Mexico shelf and deepwater. New Orleans
 
Drilling Engineer - D589 Drilling and Completions Engineer with more than 30 years of experience working for a major operator. Expertise in completions engineering including completion design for long extended reach horizontal wells, open-hole completions, swellable packers, multi-zone completions, and hydraulic fraturing. Additionally experienced in the development and implementation of completion cost reduction strategies while optimizing efficiency. Geographic areas worked include the Gulf of Mexico, Louisiana, the Rocky Mountains, and West Africa. Software skills include Nodal Analysis, MFRAC, ToolPro, and WellCat. United Arab Emirates
 
Drilling Engineer - D571 Drilling Engineer with a bachelor’s degree in petroleum engineering and ten years of experience with a large independent and a drilling service company. Experienced in designing, planning, coordinating, and implementing onshore horizontal drilling in the mid-continent Woodford and Bakken shales. Experienced also in optimizing drilling programs and performance through revising casing design, improving wellbore hydraulics, and revising mud and cementing programs. In addition, experienced in deepwater planning and execution of wells from permitting through drilling. Geographic areas worked include North Dakota, Oklahoma, Texas, and the Gulf of Mexico. Houston
 
Drilling Engineer - D548 Drilling and Completions Engineer with a bachelor’s degree in petroleum engineering and 14 years of experience working for mid-sized and major operators, and a major service company. Expert in drilling, completion, well intervention and operations, workflow, and project start-up. Additionally experienced in leadership, management, cost efficiency, technology utilization, directional and horizontal drilling, reservoir management, and HSE practices in offshore and onshore operations. Geographic areas worked include the Gulf of Mexico shelf and deepwater, west Texas, the mid-continent, South America, and Russia. Houston
 
Drilling Engineer - D570 Drilling Engineer with a bachelor’s degree in petroleum engineering and six years of experience working for small to large operators. Experienced in well design, directional well planning, cost estimation, field tracking, horizontal drilling, lost circulation management, lateral drilling, completion, regulatory reporting, workovers, production monitoring, and abandonment. Geographic areas worked include Texas, Oklahoma, New Mexico, and Brazil. Software proficiency in DIMS, WellView, and RIMbase. Licensed Professional Engineer in the State of Texas. Houston
 
Drilling Engineer - D16 Drilling engineer with a Bachelor's Degree and 28 years of experience working for an independent and major oilfield service companies. Experienced in both foreign and domestic directional well planning, permitting, prognosis, and operations. Geographic areas worked include Texas, North Dakota, Mississippi, the Gulf of Mexico, and Venezuela. Proficient in Microsoft Office, Lotus 1-2-3, AutoCAD, DesignCAD, and Landmark Graphics Well Plan. Fluent in Spanish. Houston
 
Drilling Engineer - D576 Drilling Engineer with a bachelor’s degree in petroleum engineering and 12 years of work experience working for mid-sized operators and in the military. Experienced in executing drilling programs, creating AFEs, preparing directional plans, selecting equipment, executing geosteering operations, optimizing drilling operations, preparing end of well reports and management of change reports, preparing well cost estimates, approving invoices, coordinating survey inspections, and conducting volumetric, decline curve, and material balance analysis. Geographic areas worked include Texas, Colorado, and the Gulf of Mexico. Software proficiency in ARIES, MBAL, PROSPER, IHS Petra, and PHDWin. Houston
 
Drilling Engineer - D566 Drilling Engineer with a bachelor's degree in petroleum engneering and 32 years of experience working for operators, a service company, and as a consultant. Experienced in vertical drilling, horizontal drilling, side track drilling, slot recovery drilling, directional drilling, completion operations, and workover operations. Additionally experienced in well planning, well site supervision, AFE preparation, permitting, cost control, tender evaluation, equipment selection, and vendor management. Geographic areas worked include the Gulf of Mexico shelf and inland waters, deepwater offshore West Africa, Equatorial Guinea, Texas, Louisiana, Oklahoma, Arkansas, Mississippi, Alabama, and North Dakota. Certifications include TWIC, Well Control, and HUET. Houston
 
Drilling Engineer - D573 Drilling Engineer with a master's degree in mechanical engineering and four years of experience working for a major operator. Experienced in drafting wells’ statements of requirements; performing rig intake, startup, and assessment; using risk-based analysis to tailor global completion policies for use with onshore unconventional assets; executing multi-well pad development drilling programs; and planning and executing horizontal well operations. Geographic areas worked include Alaska, Wyoming, and Oklahoma. Software proficiency in OpenWells, WellPlan, Compass, and StressCheck. Certifications include BOSIET, EST, IADC Rig Pass SafeLand and SafeGulf, and TWIC. Houston
 
Drilling Engineer - D562 Petroleum Engineer with a bachelor’s degree in petroleum engineering and two years of experience in the oil and gas industry working for a software support company and an engineering services company. Experienced in providing drilling software support and training including providing real-time drilling software support, providing daily technical support to all real-time systems to ensure continuous and reliable data availability, managing requests for all systems and resolving issues, training customers and users, and monitoring real-time data streams. Additionally experienced as a drill log analyst conducting quality control on rig data, deploying and installing rig hardware, supervising and monitoring drilling and log measurements data, creating well reports, updating field reports, and analyzing and performing case studies for rig deviations. Software proficiency in MaraDrill, WellView, and ProAct. Language fluency in Spanish. Houston
 
Drilling Engineer - D560 Drilling Operations Engineer with a master's degree in engineering management and five years of experience working for service companies. Experienced in supervision of drilling operation teams, MWD data acquisition and interpretation, log generation, real-time surveying for directional drillers, and Failure Mode Effect analysis. Additionally experienced in writing specifications and standards for equipment, P&ID interpretation, and corrosion mitigation. Software proficiency in AutoCAD, Pro E, SolidWorks, ANSYS, CAPSIM, and Minitab. Certified Project Management Professional and Lean Six Sigma Green Belt. Houston
 
Drilling Engineer - D9 Drilling Engineer and wellsite supervisor with bachelor's and master's degrees and more than 30 years experience in the oil and gas industry working for a major contractor and independents both onshore and offshore. Certified cost engineer specializing in project controls. Experienced in drilling engineering, operations, wellsite supervision, well program designs, and turnkey bid estimates. Geographic areas worked include south Texas, Kuwait, Nigeria, Angola, Cameroon, North Sea, Libya, Venezuela, and Morocco. Computer skills include Microsoft Office, dBase, Access, @Risk, Primavera, Microsoft Project, and Timeline. Fluent in English and competent in Spanish. Houston
 
Drilling Engineer - D161 Drilling and Completions Project Manager with an MBA in finance, a bachelor's degree in petroleum engineering, and 35 years of experience in the oil and gas industry working for a major oil company, mid-sized operators, and as a consultant. Expert in drilling and completion management for land, inland water, and offshore operations for drilling, completions, and workover projects. Experienced in completing subsea wells using horizontal trees, well operations management, management of third party contractors, negotiating major equipment contracts, rig selection, platform design, platform installation, high angle drilling, and production facility design. Geographic areas worked include the Gulf of Mexico shelf and deepwater, Texas, and Louisiana. Lafayette
 
Drilling Engineer - D335 Drilling Engineer with a bachelor’s degree in mining engineering and over 30 years of experience working for major operators. Experienced in drilling and completions design, well control, execution of deepwater development projects, and evaluation of well design alternatives to balance drilling risk and project economics. Geographic areas worked include the Gulf of Mexico, California, Colorado, Louisiana, Alaska, West Africa, Indonesia, and China. Software proficiency in Landmark Well Plan. Certifications include IADC surface and subsurface well control. Houston
 
Drilling Engineer - D538 Drilling Engineer with a bachelor's degree in petroleum engineering and 13 years of experience working for large operators and service companies. Expert in well planning. Additionally experienced in casing design, drilling operations, stimulation operations, fluid analysis, drilling, production, and completion reporting; data management, software training, and delivering technical presentations. Software proficiency in WELLCAT, WELLPLAN, DRILLBENCH, COMPASS, WELLSCAN, and StressCheck. Houston
 
Drilling Engineer - D495 Drilling and Completions Consultant with a master's degree in civil engineering and 38 years of experience working large independent and major operators. Expert in applying technology and services to improve performance and reduce the costs of well construction. Additionally experienced in production, completion, workover, and drilling operations; AFE preparation, cost estimation, infield drilling review, underbalanced drilling, vendor selection, and wellsite supervision. Geographic areas worked include the Gulf of Mexico, Texas, Mississippi, Alabama, and Louisiana. Registered Professional Engineer in the State of Louisiana. Houston
 
Drilling Engineer - D15 Drilling engineer with a bachelor's degree and 29 years of experience working for national oil companies, service companies, and as a consultant. Experienced in well design, completion design, AFE creation, health and safety compliance, and cost control oversight. Additionally experienced in rig supervision, well monitoring, well control, well logging, pore pressure evaluation, formation analysis, and petroleum geology. Geographic areas worked include the Gulf of Mexico, Nigeria, offshore Egypt, the Red Sea, the Gulf of Suez, and the Middle East. Software proficiency in Landmark software and various proprietary drilling software packages. Certifications include IWCF Drilling and Workover Supervisor, MMS Drilling, Completion, and Workover Supervisor; H2S Safety, and BOP. Houston
 
Drilling Engineer - D521 Drilling Engineer with a bachelor’s degree in mechanical engineering and more than 30 years of experience working for a major operator and as an independent consultant. Experienced in well planning, estimating, logistics, contracting, rig team training, execution, and completion. Additionally experienced in facilitating or instructing various technical drilling operations courses. Software proficiency in Landmark WellPlan. Language fluency in English. Licensed Professional Engineer in the State of Texas. Houston
 
Drilling Engineer - D523 Drilling Engineer with a bachelor's degree in chemistry and eight years of experience working for service companies and mid-sized to large operators. Experienced in casing design, BHA design, cost estimating, AFE preparation, drilling and workover problem solving, and well construction optimization. Additionally experienced in drilling operations including vertical and horizontal drilling in conventional and unconventional plays, mud logging, MWD operations, downhole tool preparation, and reporting. Geographic areas worked include Texas, Arkansas, West Virginia, Pennsylvania, and the Gulf of Mexico. Software proficiency in WellView, Petrolink software, Petron software, and DecisionSpace. New Orleans
 
Drilling Engineer - D365 Drilling and completion engineer with 24 years of experience. Extensive background in offshore/onshore well planning and design. Skilled at Deep water Rig Operations, Well Cost Estimates, Data and Site Survey Analysis, Well Testing Programs, Work Scope Preparation, Vendor Relations, Computer / Software Skills, Drilling and Workover Programs, Cost / Budget Management, HSE Compliance, and Quality Assurance & Control. Canada
 
Drilling Engineer - D39 Drilling Engineer with a bachelor's degree in petroleum engineering and 35 years of experience working for small to mid-sized operators. Experienced in well design, horizontal and vertical drilling operations, HPHT drilling, low pressure drilling, completions, workovers, and stimulation operations. Geographic areas worked include Texas, Louisiana, Oklahoma, Kansas, Wyoming, West Virginia, and New York. Software proficiency in DIMS. Dallas/Ft. Worth
 
Drilling Engineer - D520 Drilling Engineer with a bachelor’s degree in mechanical engineering and 41 years of experience working for independents and major oil and gas operators. Experienced in designing, implementing, and overseeing drilling, testing, and completion operations in domestic and international locations including onshore, offshore, and deepwater. Geographic areas worked include the Gulf of Mexico, Indonesia, Thailand, and Egypt. Software proficiency in DIMS, SOLIDWORKS, and AutoCAD. Language fluency in English with a basic command of Indonesian. Houston
 
Drilling Engineer - D164 Drilling Engineer with a bachelor’s degree in petroleum engineering and over 30 years of experience working for independents and large operators. Experienced in drilling, completion, and workover design and operations; well control; horizontal and directional drilling; and high-pressure, high-temperature drilling. Geographic areas worked include the Gulf coast, south Louisiana, south Texas, offshore federal blocks, the Rocky Mountains, Trinidad, Peru, and Equatorial Guinea. Software proficiency in Landmark Well Plan. Language fluency in English and French. Houston
 
Drilling Engineer - D515 Drilling Superintendent with a bachelor's degree in mechanical engineering and 31years of experience working for operators, service companies, and as a consultant. Experienced in drilling and completions including wildcat exploratory, sour gas, high pressure, directional, horizontal, and air drilling of shale and CBM wells. Additionally experienced in drilling and completion planning. Geographic areas worked include Texas, Alabama, Arkansas, Colorado, Oklahoma, Indiana, Louisiana, Mississippi, New Mexico, Tennessee, and Washington. Texas
 
Drilling Engineer - D192 Drilling Engineer with a master's degree in petroleum engineering and over 30 years of experience working for major drilling service companies. Experienced in intelligent completions, drilling optimization, onshore and offshore drilling, directional drilling, ERD, formation and evaluation tool development, and gas transmission. Additionally experienced in training and mentoring drilling applications engineers. Geographic areas worked include the Gulf of Mexico shelf and deepwater, various onshore U.S. basins, Austria, Germany, Romania, Hungary, and Spain. Certifications include drill bit optimization, drilling performance, and pressure management. Houston
 
Drilling Engineer - D227 Drilling Engineer with a bachelor's degree in petroleum engineering and 38 years of experience working for operators, service companies, and as a consultant in the oil and gas industry. Experienced in drilling, completions, and workovers including wellsite supervision, contract negotiations, cost planning, casing design, directional drilling, horizontal drilling, miscible flood analysis, artificial lift systems, salt water and toxic waste disposal, HSE, nodal analysis, and hydraulic fracturing. Geographic areas worked include Texas, Louisiana, Alabama, Oklahoma, Colorado, New Mexico, Wyoming, North Dakota, Utah, Pennsylvania, and New York. Software proficiency in WellView, DIMS, PERC, PHDWin, ARIES, Bengal, and Perform. Oklahoma
 
Drilling Engineer - D476 Drilling Operations Engineer with 30 years of experience working for drilling service companies. Experienced in wellsite supervision including crew supervision, fishing operations, packer operations, completion operations, fracturing operations, tubing operations, wireline operations, and plugging operations. Geographic areas worked include west Texas, Colorado, New Mexico, Utah, and Arizona. Computer skills include DIMS software. New Mexico
 
Drilling Engineer - D172 Drilling Engineer with a Batchelor's in Chemical Engineering and over 20 years of experience at various positions in drilling, including mud engineer, rig supervisor, drilling engineer, research engineer, technical instructor, drilling engineering advisor, drilling superintendent, drilling project manager, and general manager of a small service company. Offshore and land experience. Geographic experience includes California, Texas and Louisiana, GOM, Virgin Islands, Canada, UK, Norway, Holland, Abu Dhabi, Somalia, Nigeria, Brazil, Venezuela, Kazakhstan and Indonesia. Fluent in Portuguese and Spanish. Brazil
 
Drilling Engineer - D510 Drilling and Completion Superintendent with a bachelor's degree in petroleum engineering and 21 years of experience working for small to mid-sized independents and as a consultant. Experienced in drilling, completions, production, workovers, fracturing operations, open-hole and cased-hole fishing, field supervision, coiled tubing operations, horizontal and multi-lateral drilling, artificial lift systems, and high pressure stimulation treatments. Geographic areas worked include Texas, Oklahoma, New Mexico, Arkansas, Louisiana, Utah, California, Wyoming, Montana, Alaska, and the Gulf of Mexico. Software proficiency in DIMS, OpenWells, HalLog, ARIES, Peep, and Petra. Oklahoma
 
Drilling Engineer - D322 Drilling Engineer with a bachelor's degree in petroleum engineering and 36 years of oil and gas experience working for mid-sized independents and major oil and gas companies. Experienced in conventional, horizontal, and ERD drilling; completion design and operations, production, workover operations, and unconventional plays including shale and coalbed methane. Geographic areas worked include Texas, Louisiana, Arkansas, Nebraska, Oklahoma, Colorado, New Mexico, Wyoming, North Dakota, Alaska, the Gulf of Mexico, Europe, Asia, and Africa. Oklahoma
 
Drilling Engineer - D24 Registered petroleum engineer with 40 years of experience with producing and service companies. Well experienced in project management, on-site supervision, well planning, and materials procurement for domestic and international ventures. Especially adept in adapting modern technology to specific needs in order to provide efficient and economic solutions to problems encountered while drilling deep, high pressured, hot, and highly deviated wells. Geographical areas worked are Algeria, Venezuela, Guatemala, Pakistan, Kenya, Mexico, Colorado, Louisiana, the Gulf of Mexico, Montana, Nebraska, New Mexico, North Dakota, Oklahoma, Texas, Utah, and Wyoming. Proficient in Spanish. Houston
 
Drilling Engineer - D291 Drilling and metallurgical consultant with Doctorates and 23 years of experience in drilling mechanics and material selection for the oil and gas industry. Experienced in managing and marketing projects associated with drilling technologies. Skilled at implementing specific technologies such as underbalanced drilling (UBD), hematite densifier for drilling fluids, hard-rock drilling, string design and material selection for production operations, failure analysis of petroleum equipment, and quality control systems. Familiar with hammer bit tests for hard rocks, with the ADIOSTM methodology to prevent drill pipe failures, material selection for H2S and CO2 service, and tubular selection restricting casing collapse on HPHT wells. Dallas/Ft. Worth
 
Drilling Engineer - D499 Senior Drilling Manager with over 30 years of experience in the oil and gas industry in senior roles of highest technical responsibility, of which the last 10 years were spent in the leading role of well interventions manager for an international major operator. Effectively responsible for delivering in excess of 20MBOEPD and ensuring the integrity of more than 10,000 wells. Extremely strong technical leadership in drilling and completion operations and asset leadership in areas such as HPHT, tight gas, shale, and the shallow and deep waters of the Gulf of Mexico. Strong business acumen with expertise in preparation and control of capital budgets, engineering planning and management, production operations, project management, and technology development and implementation. Houston
 
Drilling Engineer - D451 Drilling and Completions Engineer with a bachelor's degree in petroleum engineering and 25 years of oil and gas experience working for small-to-large independents. Experienced in project management, well design, completion design, field supervision, horizontal and directional drilling, and underbalanced drilling. Geographic areas worked include Texas, Arkansas, Alabama, Mississippi, Oklahoma, Colorado, Pennsylvania, China, and Poland. Texas
 
Drilling Engineer - D22 Drilling engineer with Master's Degree and nine years of experience with two major petroleum industry service companies, and two years of experience as a wellsite geologist. Expert in technical analysis of product performance of drill bits. Highly experienced in drilling operations, product sales, and wellsite management. High level of experience in well design, drilling fluids, horizontal drilling and deepwater drilling. Geographic areas worked include Syria, Egypt, Tunisia, Libya, Gabon, Nigeria, and Texas. Computer skills include Microsoft Excel, Word, Powerpoint, Dbase, Eclipse, MatBal, Unix, Geo-Atlas, Terra-Station, DMS, and Drillbyte. Houston
 
Drilling Engineer - D94 Drilling engineer with an M.B.A and 12 years of experience with a large oil company, handling onshore electrical rigs, well design, and completion. Skilled in handling multiple rigs, planning, provisioning staff and materials, and monitoring operations. Proficent in monitoring, controlling, and trouble shooting drilling operation issues. Very knowledgeable of budgeting and material procurement for onshore oil well drilling. A proven team player. Geographic areas worked include southern and northeast India. Computer skills include MS Office and drilling database management using Oracle 8i. Fluent in English, Tamil, and Hindi. Texas
 
Drilling Engineer - D43 Drilling professional with a Bachelor's degree and over 25 years of experience with a major oil company and a large independent. Extensively experienced in international drilling operations. Strong in project planning and management, with progressive responsibilities from project engineer to department manager. Committed team leader/player with excellent interpersonal, communication and administrative skills; a flexible self-starter who is also able to work independently. Geographic areas worked include Texas, Louisiana, Kansas, Wyoming, California, the Gulf of Mexico, the North Sea, and north and west Africa. Computer skills include MS Office. Oklahoma
 
Drilling Engineer - D2 Professional drilling engineer and wellsite supervisor with two Bachelor's degrees and 38 years of diverse experience working for major and independent oil and gas companies. Experience includes horizontal drilling operations, reservoir studies, property evaluations, directional drilling, workover operations, and wellsite supervision. Geographic areas worked include Russia, the Middle East, north Africa, west Africa, the Far East, Europe, Gulf of Mexico, Mexico, west Texas, Columbia, Venezuela, and Argentina. Fluent in Spanish. Houston
 
Drilling Engineer - D466 Drilling Engineer with a bachelor's degree in petroleum engineering and 11 years of experience working for large service companies. Experienced in well planning, AFE preparation, design of BHA tools, underbalanced drilling, MWD operations, formation pressure evaluation, and crew supervision. Geographic areas worked include the deepwater Gulf of Mexico, Alaska, Texas, Louisiana, New Mexico, the Middle East, the Persian Gulf, and the Caspian Sea. Software proficiency in BHASYS, WellArchitect, DigiDrill, and RIGSITE. Language proficiency in French, Romanian, Spanish, and Italian. Texas
 
Drilling Engineer - D449 Drilling Engineer with a bachelor's degree in mechanical engineering and 30 years of experience working for independent oil and gas companies and as a consultant. Experienced in deepwater design and operations, workovers, HPHT drilling, ERD, and high-angle directional drilling. Geographic areas worked include California, Texas, Louisiana, the Rocky Mountains, the Gulf of Mexico, Venezuela, West Africa, Brazil, Canada, and the Gulf of Thailand. Florida
 
Drilling Engineer - D458 Drilling Engineer with a bachelor's degree in material science and engineering, a master's degree in business administration, and 12 years of upstream oil and gas experience working for a major service company. Experienced in directional drilling, multi-lateral drilling, drilling optimization, equipment design, bottomhole assembly design, drilling program design, HSE policy and procedural compliance, and instructing junior engineers. Geographic areas worked include the Gulf of Mexico, the Gulf Coast, Malaysia, Vietnam, Indonesia, and China. Computer skills include DIMS. Houston
 
Drilling Engineer - D65 Petroleum engineer with a Master's degree and ten years of experience including crude oil refining, both domestic and international, reserve estimation, field development studies, project economics, and drilling, completion, production, and workover operations. Geographic areas worked include the Gulf of Mexico, the North Sea and the Niger Delta. Proficient in various computer programs including Microsoft Office, Lotus 1-2-3, Volsim, PAL, Hysim and Compass. Familiar with ARIES and FORTRAN. Houston
 
Drilling Engineer - D460 Drilling and Completions Engineer with a bachelor's degree in petroleum engineering and 18 years of experience working for small-to-mid-size independents and a major E&P company. Experienced in well planning, drilling, completions, workovers, site preparation and logistics, fracing, wireline operations, cementing, and acidizing. Geographic areas worked include Texas, Louisiana, New Mexico, and Wyoming. Texas
 
Drilling Engineer - D81 Drilling Engineer with a bachelor's degree in petroleum engineering and 23 years of experience working for service companies and as a consultant. Experienced in new drills, completions, re-entries, workovers, vertical, horizontal, and directional drilling; project management, cost estimating, and planning, designing, and implementing drilling operations. Geographic areas worked include Texas, Colorado, Wyoming, Utah, Arkansas, Louisiana, and Canada. Software proficiency in PERC, Compass, Wellz, WELLPLAN, DSS, SolidWorks, and Flowmaster. Texas
 
Drilling Engineer - D177 Drilling Engineer with a bachelor's degree in petroleum engineering and 35 years of experience working for major and independent oil companies and service companies. Experienced in drilling, completions, production operations, well site engineering, well design and execution, deepwater and HPHT drilling, and extended reach and high deviation drilling. Additionally experienced in project management, cost control oversight, bid tendering, contract negotiations, and establishing and maintaining inventory controls. Geographic areas worked include Texas, the Gulf of Mexico, Malaysia, Egypt, Chad, Indonesia, Brunei, Spain, Peru, New Zealand, the Philippines, China, and the West Indies. Houston
 
Drilling Engineer - D175 Drilling engineer with a Bachelor's Degree and over 18 years of international experience in the oil and gas industry with positions in production operations, well and drilling engineering operations, well planning, completions, and technology applications. Skilled in project management, team building, communications, and presentations. Experienced and skilled in the planning, design, and execution of oil and gas well construction, well optimization, food processing and packaging, and brewing and bottling projects. Comfortable utilizing technical, operations, and people management skills to lead many projects to successful completion on time and within budget. Geographic experience includes Nigeria and Malaysia. Proficient in MS Office and proprietary applications such as COMPASS, WELLPLAN, WELLCAT, StressCheck, DSD, STABOR, Casing Seat, GeoPath, SUCOP, BGGM, and SSP. Canada
 
Drilling Engineer - D208 Petroleum engineer with a Bachelor's Degree and over 20 years of diverse domestic and international oilfield experience. Competent with both in-house and direct wellsite supervision of drilling, completions, and workovers. Experienced in field development, portfolio and project economics, and operations. Comfortable with project tenders, evaluations, cost analysis, implementations, and management. Experienced in offshore drilling operations and HP/HT wells. Can operate independently or as a group team player. Geographic areas worked include Canada, the United States, France, Turkmenistan, Libya, and Oman. Canada
 
Drilling Engineer - D472 Drilling Engineer with a bachelor's degree in petroleum engineering and 25 years of experience in the oil and gas industry working for upstream operators and service companies as well as midstream companies. Experienced in deepwater drilling, horizontal drilling, directional drilling, exploration drilling, completions, cost estimating, well design, workovers, and drilling operations oversight. Geographic areas worked include Alaska, the Gulf of Mexico deepwater, offshore Cameroon, offshore Nigeria, Gabon, Mexico, and Switzerland. (add new)
 
Drilling Engineer - D268 Drilling Engineer with a bachelor’s degree in mechanical engineering and more than 40 years of experience working for a major operator and several large independent companies. Experienced in ultra wildcat well design and drilling, deep water exploration well design and implementation, turnkey well design and implementation, pore pressure analysis, and long reach geopressured well design and planning. Geographic areas worked include the United States, Trinidad, Azerbaijan, India, Papua New Guinea, Gabon, the Ivory Coast, Ghana, and Equatorial Guinea. Houston
 
Drilling Engineer - D459 Drilling and Completions Engineer with a bachelor's degree in petroleum engineering and 28 years of oil and gas industry experience working for small- to mid-sized oil and gas companies. Experienced in well planning, creating drilling procedures, field development, well optimization, log interpretation, formation evaluation, stimulation techniques, fractured completions, gravel pack completions, cost estimating, hydraulic fracture design, workover design, well construction, HSE compliance, and BHA design. Geographic areas worked include Texas, Louisiana, the U.S. Gulf coast, the Gulf of Mexico, and West Africa. Software proficiency in DIMS, Stress Check, PIE, MBAL, GAP, PROSPER, and GeoGraphix for well log interpretation. IWCF and IADC certified. Dallas/Ft. Worth
 
Drilling Engineer - D450 Drilling Engineer with a bachelor's degree and two year's of experience in the oil and gas industry. Experience includes onshore and offshore drilling. Skills include well design, well drilling including cased and directional drilling, well completions, data assemblage, preparing job tickets, troubleshooting field equipment, and production systems design. Geographic areas worked include the Gulf of Mexico, south Texas, and Louisiana. Computer skills include Microsoft Office and Eclipse. Houston
 
Drilling Engineer - D296 Drilling Engineer with a bachelor’s degree in mechanical engineering and 35 years of experience in the oil and gas industry. Expert in the design and engineering of deepwater wells. Experienced in HTHP wells, floaters, jack-ups and dynamically positioned drill ships. Participated in numerous international drilling projects for major oil companies. Computer skills include DIMS, StressCheck, WellPlan, and MS Project. Houston
 
Drilling Engineer - D154 Drilling engineer with a Masters and Bachelors degree and three years of experience in drilling, completion, and production oilfield equipment engineering, including repairs and maintenance. Able to help organize crews and necessary equipment for tubular handling on rigs. Adept at handling chrome pipes using specialized materials or equipment to prevent pipe marking during the making or breaking up of joints. Geographic experience includes the Niger Delta of Nigeria, Germany, and Russia. Proficient in MS Office and Lotus 1-2-3. Nigeria
 
Drilling Engineer - D209 Account representative with a Master's Degree and 22 years of domestic and international experience. Experienced in drilling, workover, and production related well services, and industrial and pipeline services. Comfortable with well cementing, casing equipment, fracturing, acidizing, nitrogen services, service tools, DST, TCP, coiled tubing services, and slickline services. Experienced in IS/ITP projects and exposed to service lines including e-line services, completions products, DD/MWD/LWD, SDL, SDBS, and Baroid drilling fluids. Geographic areas worked include south Texas, the San Juan basin, Colorado, India, Pakistan, Oman, Saudi Arabia, Qatar, Turkey, and Indonesia. Proficient in Microsoft Office and Lotus 1-2-3. Highly skilled in the use of FracPro, Simulator, HalWin, XERO, SAP(OTC) and Seibel’s SFE. Familiar with InSite, Stim2001, WellCat, DIMS, and Compass. Houston
 
Drilling Engineer - D231 Petroleum engineer with a Master's Degree and 10 years of offshore and onshore experience in drilling projects for vertical and deviated wells. Skilled in bit selection, BHA selection, drill string projection, well paths, and project economics. Geographic area worked is the region from Romania to the Black Sea. Proficient in various computer programs including Microsoft Office and some programming languages such as Visual Basic, TP7, FORTRAN, and Java. Romania
 
Drilling Engineer - D26 Drilling engineer with a Bachelor's Degree and moer than 30 years of work experience with two major oil and gas companies. Extensive Albania field experience in drilling operations. Highly experienced in designing drilling well programs in Albanian oil fields including mud, drillstring, casing, cementing, and costs. Highly skilled in computer applications of casing design and hydraulic design. Geographic areas worked include Albania and Italy. Computer skills also include Microsoft Office, Lotus 1-2-3, Freelance Graphics, Dbase, @Risk, Crystal Ball, ARIES, OGRE, PEEP, Workbench, SAM, WEM, Production Analyst, Dwight's/P.I., Simulation, and Material Balance. Fluent in Albanian, Italian, and Russian Houston
 
Drilling Engineer - D315 Drilling Operations Manager with over 25 years of experience in drilling, completion and production operations. Experienced in wellsite supervision, writing programs for gas lift and jet pump applications and planning drilling and completion projects. Geographic areas worked include, Colorado, Texas, Kansas, and Wyoming. Houston
 
Drilling Engineer - D222 Petroleum engineer with a Bachelor's Degree and 25 years of domestic and international experience in reservoir, production, and drilling projects. Experienced in reserve estimation, field studies, portfolio and project economics, field development, gas-lift design and operations, stimulation design, and production log analysis. Geographic areas worked include southern California, Indonesia, and the North Sea. Proficient in various computer programs including Production Analyst, Prophet, VIP, and PanSystem. Highly skilled in the use of Microsoft Office products, particularly Word, Excel, and Access (MOUS Expert Certification). Familiar with Lotus 1-2-3, Eclipse, Exodus, FRACPRO, ARIES, OGRE, WEM, GASWAT and OILWAT, and Fortran. Oregon
 
Drilling Engineer - D352 Drilling and completions manager with over 30 years of experience with a large independent oil company. Extensively experienced in drilling, completion and production operations. Skilled at supervising engineering and operations personnel in the design and execution of a region's capital, EHS, and regulatory program. Comfortable with all aspects of drilling activity, including contracting rigs, well design, and timely execution of plan. Skilled at deep drilling on the Gulf of Mexico shelf. Geographic experience includes the Gulf of Mexico, the Texas Gulf coast, north and south Louisiana, and east Texas. Houston
 
Drilling Engineer - D186 Drilling and Workover Supervisor with 32 years of experience with major international oil companies in positions of increasing responsibility. Has represented large oil companies as a Drilling Representative and Drilling Supervisor. Additional skills include supervision of drilling and testing of exploration wells, carrying out workovers and converting older wells, and supervising the upgrading of rigs. Familiar with various oil company computer systems. Fluent in Spanish. Canada
 
Drilling Engineer - D103 Wellsite and access construction supervisor with 30 years of experience, primarily in western Canada. Highly experienced in wellsite construction project management, right-of-way negotiation, and drill/production site tear down and clean up. Strong regulatory and environmental background. Excellent project management and communication skills. Canada
 
Drilling Engineer - D28 Drilling, workover, and completion engineer with Bachelor's and Master's degrees and over 40 years of industry experience with major and independent oil companies. Highly skilled in drilling design and implementation. Very accomplished at well re-entries, sidetracking, horizontal drilling, and short radius sidetracks. Also experienced in completions and workovers. Geographic areas worked include the Gulf of Mexico, onshore U.S., the Caribbean, Canada, the North Sea, Russia, and the Middle East. Computer skills include Lotus 1-2-3, Freelance Graphics, Microsoft Office, Production Analyst, Dwight's, and Eaton Pore Pressure. Houston
 
Drilling Engineer - D224 Petroleum engineer with a Bachelor's Degree and 13 years of international experience. Experienced in deep, vertical, directional, deviated, and high-pressure, high-temperature (HPHT) wells. Skilled in stuck pipe, fishing, and well control operations, and IWCF (subsea) certified. Geographic areas worked include Bolivia, Venezuela, Mexico, and Ecuador. Proficient in various computer programs including Microsoft Office, Lotus 1-2-3, Drilling Office, and AutoCAD. Highly skilled in WEMS and DIMS. Bolivia
 
Drilling Engineer - D361 Petroleum Engineer with five years of experience in well planning and design built on a strong foundation of hands-on experience as a rig site supervisor managing drilling operations. Demonstrated ability to analyze issues on a practical and strategic basis, plan appropriate actions, and implement successful solutions. Houston
 
Drilling Engineer - D202 Subsea engineer with a Bachelor's Degree and 18 years of experience in India and other international locations. Comfortable with all types of offshore drilling rigs, including turret and anchor moored drillships and semi-submersibles. Experienced with all blow out preventers and their control systems. Highly experienced in WKM, Cameron, Vetco, and Drill Quip subsea wellhead systems. Geographic areas worked include west Africa, the Gulf of Mexico, the Philippines, Brunei, Vietnam, Indonesia, Singapore, and India. Proficient with Microsoft Office and AutoCAD Light. India
 
Drilling Engineer - D295 Drilling engineer with a Masters Degree and five years of South American experience. Experienced in onshore and offshore well design and as a trajectory engineer in horizontal, high-angle, short-radius and vertical wells. Skilled at horizontal drilling, steam-assisted gravity drainage (SAGD) well drilling projects, and trajectory well design. Comfortable with drilling project planning, including scheduling and cost estimating. Computer skills include the following Landmark drilling software: COMPASS, WELL PLANING, STRESS CHECK, and DIMS. Also knowledgeable in the use of Sperry-Sun’s PlanIt drilling software and in directional drilling technology tools, such as Auto-track, Geopilot, PowerDrive, MGT, and Rotating Magnet. Venezuela
 
Drilling Engineer - D334 Drilling engineer with 22 years of experience with drilling, workover and completion projects. Experienced at drilling engineering, well-site drilling supervision, workover and completions projects, field studies, bid tenders, geo-pressure analysis, and open-hole logs analysis. Geographic areas worked include Burgos Basin in Mexico and the Maracaibo Lake, El Tigre, and Maturin regions of Venezuela. Proficient in various computer programs including Microsoft Office, Lotus 1-2-3, Predict (Geopressure Analysis), Landmark software (StressCheck & Compass), and Wellz software. Peru
 
Drilling Engineer - D319 Highly motivated petroleum engineer with ten years of extensive operational experience in the drilling, completion, and production aspects of oil and gas exploration and production. Experienced in planning and implementing well programs from spud to production for various wellbore configurations. Skilled at running rig operations, including mobilization, logistics, planning and execution of drilling, completion, and workover projects. Comfortable with reservoir analysis, petrophysical characterization, reserves estimation, and simulation for field development projects. Proficient use of various engineering software including the Landmark suite (COMPASS, StressCheck, Geographix, VIP, Casing Seat, WellCat, DIMS, DrillModel), Schlumberger Drilling Office, Eclipse100 and 300, OFM, PipeSim, CMG, GoCAD. Familiar with OGRE, Aries, GeoFrame and UNIX. Good understanding of Fortran, Visual Basic, C++ and Java programming languages. Houston
 
Drilling Engineer - D97 Drilling engineer with a Bachelor's degree, and nine years of experience in the Niger delta region of Nigeria, serving as a drilling technical consultant, and handling client problems using Landmark Graphics. Additional computer skills include drilling applications such as Well Plan, Casing Seat, Stress Check, DIMS, Profile, Data Analysis, Data Checker, and Compass. Nigeria
 
Drilling Engineer - D198 Petroleum engineer with A Bachelor's Degree and 36 years of experience in domestic drilling and drilling management. A results-oriented, profit-centered operations and marketing manager with strong analytical and evaluative skills and concentrations in planning, organizational development, financial controls, corporate restructuring, decision-making, and problem resolution. Experienced in motivating, negotiating, training, and communications. Able to maintain multiple projects in diverse and remote areas, and to negotiate with tact and tenacity. Geographic areas worked include Colorado, Wyoming, east and west Texas, New Mexico, Oklahoma, Mississippi, Alabama, Louisiana, Michigan, Illinois, Indiana, Kentucky, and West Virginia. Competent in the Microsoft Office suite. Houston
 
Drilling Engineer - D430 Drilling engineer with a Master's Degree and 34 years of experience of which 30 years are in international and frontier areas. Skilled at production and drilling projects from start-up through abandonment. Experienced in project planning, start-up and turn-around operations, drilling, completion and workover engineering, and drilling engineer training and mentoring. Comfortable with presentations to foreign government officials for approval processes, including budget, leasing renewal, and operations. Excellent communication and presentation skills. Geographic experience includes Indonesia, Australia, China, Philippians, Thailand, Angola, Israel, and Kazakhstan. Computer skills include MS Office DIMS, WIMS, Visio, WellPlan, other engineering design programs, and various directional and hydraulic programs. Washington
 
Drilling Engineer - D141 Registered petroleum engineer with bachelor's degree and 25 years of domestic and international experience in feasibility studies and field development for drilling, completion, production, construction, and offshore plug and abandonment projects. Able to prepare programs and manage projects for drilling, completion, workover, and production. Extensively experienced in well construction techniques involving fiberglass tubulars, exotic tubulars including hastelloy, duplex ss., and packer buffers for hazardous waste. Inland geographic areas worked include south Louisiana, Mississippi, Texas, Kansas, California, Oklahoma, Wyoming, North Dakota, Colorado, Russia, and Indonesia. Offshore experience includes the Gulf of Mexico, the California coast, and Brazil. Proficient in various computer programs including Microsoft Office. California
 
Drilling Engineer - D251 Mechanical engineer with a Bachelor's Degree and 12 years of onshore experience at Lake Maracaibo. Experienced in the management of completion activities, including implementation of processes and handling administration activities. Skilled at underbalance and horizontal well drilling. Highly skilled in the use of Microsoft Office, Lotus 1-2-3, and Landmark WellPlan. Fluent in English, Italian, and Spanish. Venezuela
 
Drilling Engineer - D206 Drilling and petroleum engineer with a Bachelor's Degree and 18 years of domestic and international experience in production, drilling, completions, workover, and abandonment projects. Skilled in planning and economics, field studies and development, portfolio and project economics, operations, and log analysis. Geographic areas worked include onshore south Louisiana, Texas, west Africa, Europe, the North Sea, the Middle East, and the Gulf of Mexico. Proficient in various computer programs including Microsoft Office, SAP, DIMS, Well Plan, and SAM. Familiar with WEM, OGRE, PEEP, and MATLAB. Canada
 
Drilling Engineer - D162 Mechanical engineer with a masters in mechanical engineering and 12 years of oil industry and engineering experience. Experienced in all aspects of drilling engineering, including wellsite supervision, drilling operations engineering, well technology support, business improvement, and planning. Geographic experience includes the Niger Delta area of Nigeria. Proficient in numerous computer software, including Microsoft Office, well planning software (Compass, WFW, Wellcat, Stresscheck, IDM), well reporting software (DIMS, Profile), and Fortran. Nigeria
 
Drilling Engineer - D153 Drilling engineer with a Bachelors degree and 12 years of experience in directional drilling in both onshore and offshore fields. Geographic areas worked include western India on-land, northeastern India, which is tectonically active with high dip formations requiring mud specific gravity, and western offshore India on jack-up rigs. Proficient in various computer programs including Mathematica (drilling-related software involving hydraulics, and directional drilling), Pipesim, and Microsoft Office tools. Familiar with Fortran and C++. Oklahoma
 
Drilling Engineer - D152 Field engineer with a bachelor's degree and five years of domestic experience. Familiar with the major applications of logging including identifying reservoir characteristics and boundaries for field development, detecting mechanical and well construction problems, providing guidance for operators and enhancement recovery projects, and evaluating treatment effectiveness. Knowledgeable in the electrical and mechanical functionality of logging tools and theory. Houston
 
Drilling Engineer - D128 Petroleum engineer with a Master's degree and 15 years of experience in onshore exploratory drilling, wellsite supervision, workovers, and completion, especially in high-pressure, high-temperature holes. Highly experienced in preparing work programs and procedures, data management, and well analysis. Knowledgeable in the areas of drilling fluids and wellbore stability, well monitoring, logging, pore pressure evaluation, and formation analysis. Worked in Yamal Peninsula, Western Siberia Basin, and southern California. Computer proficiency includes MS Office, AutoLog, some 3-D applications, Drillworks/DrillQuest, and company-specific software. Canada
 
Drilling Engineer - D12 Drilling specialist with eight years of oil and gas industry experience working for a major and independent companies as a drilling, workover, and completion rig-site supervisor. Experienced in drilling optimization, well control, high-angle and horizontal drilling, log correlation, gravel packing, and dual-string completions. Strong background in drilling fluids and solids control. Geographic areas worked include offshore Gulf of Mexico, Texas, north Louisiana, Illinois basin, south Florida basin, and Spain. Computer skills include intermediate knowledge of dBase, Microsoft Word, Windows 95, and Fortran programming language. Semi-fluent in Spanish. Louisiana
 
Drilling Engineer - D1 Drilling and production engineer with a bachelor's degree in petroleum engineering and more than 40 years of industry experience working for independent oil companies and as a consultant. Highly experienced in preparing work programs and procedures, cost estimates, and onsite supervision for drilling, recompletion, and workover projects. MMS certified in surface and subsurface workover completion, coil tubing, snubbing, and small tubing pressure control. Geographic areas worked include Gulf of Mexico, east Texas, Mississippi, and coastal Louisiana. Proficient in Microsoft Office and Lotus 1-2-3. New Orleans
 
Drilling Engineer - D20 Petroleum Engineer with a Bachelor's Degree and over 25 years of hands-on experience, both international and domestic. Experienced in presenting work based on sound engineering and preparation with attention to safety, environmental, and regulatory concerns, cost control, logistics, and personnel. Adept at writing drilling programs for semi-submersible, jack-up, and land rigs. Experienced at field supervision of directional drilling, completion, stimulation, and workovers. Expert in coiled tubing, slim hole, and short-radius horizontal jobs. Fluent in Spanish and Portuguese with some Chinese. Houston
 
Drilling Engineer - D19 Drilling engineer with a Bachelor's Degree and 23 years of experience working for large service companies, primarily as a directional and horizontal driller. Experienced in positive displacement motors and conventional assemblies, MWD operations, surveying, and wireline steering tools. Experienced in all phases of directional drilling and associated tools. Skilled in managing people effectively and motivating them to increase productivity. Proven record of increasing sales revenues. Proficient at interfacing with clients in technical and sales matters. Adept at providing knowledgeable, thorough customer service. Experienced in startup operations. Geographic areas worked include the Gulf coast, Texas, Oklahoma, Louisiana, the North Sea, the Middle East, north Africa, Mexico, Colombia, and Venezuela. Houston
 
Drilling Engineer - D10 Drilling engineer with a Bachelor's degree and nine years of experience as an applied drilling engineer and one year of experience working as part of an integrated team developing and testing new drilling software packages. Experienced in the coordination of day-to-day rig operations. Good knowledge in the areas of drilling fluids and wellbore stability, drillstring design, bit selection, downhole tools, and geopressured drilling operations. Possesses a working knowledge of drilling management, cementing, blowout control, sidetracking, slim-hole drilling, deepwater drilling, and sour gas drilling. Geographic areas worked include Nigeria, North Sea, Middle East, and the Gulf of Mexico. Computer skills include a high degree of expertise in Excel, dBase, and Microsoft Word. Intermediate skills in Lotus 1-2-3, and MS Office. Houston
 
Drilling Engineer - D3 Drilling supervisor with Bachelor's degree and 30 years of experience working for major and independent oil companies. Experienced in field supervision of drilling, completions, and workovers both onshore and offshore. Extensive experience includes water-based mud, oil-based mud, and air and foam drilling. Experienced in well program design including drillstring, bit selection, and downhole tool selection. Experienced in geopressured and sour gas drilling environments. Geographic areas worked include the west coast, Arctic Slope, Arbuckle Trend, south Gulf coast, Appalachians, offshore Texas, offshore Louisiana, southern Mexico, Rocky Mountains, west Texas, and Texas Chalk. Houston
 Return to the top of the page

Learn More About Collarini Energy Staffing





         Submit Resume
             Featured Candidates
                 Open Positions
                        Company News
                                 Contact